7/8” x 2-3/8” (thickness x width)
Mitered cabinet door frames pattern and panel inserted in slot
Moulding 51/09...T-82
$90 set up
1” x 2-3/8” (thickness x width)
used to make cabinet door frames...shown without 1/4" dado for panel
Moulding 23/06...T-28
$60 set up as shown...add $30 with dado
11/16” x 2-1/2” (thickness x width)
Mitered cabinet door mould
Moulding 51/10...T-84
$100 set up
3/4” x 2-1/2” (thickness x width)
used as a perimeter of a cabinet door
Moulding 48/03...T-72
shown $80 set up. add $30 for dado
3/4” x 2-1/2” (thickness x width)
Moulding 134/08...T-179
$90 set up
spec your dado dimensions
13/16” x 2-1/2” (thickness x width)
Spec gap dimension, double beaded
Moulding 79/03...T-122
$90 set up
13/16” x 2-1/2” (thickness x width)
Spec gap dimension, beaded
Moulding 82/05...T-115
$90 set up
13/16” x 2-1/2” (thickness x width)
Moulding 118/07...T-165
$90 set up
spec dado size
13/16” x 2-1/2” (thickness x width)
Moulding 176/11...T-224
$100 set up lip mould
15/16” x 2-1/2” (thickness x width)
another door frame mld shown w/out dado for panel
Moulding 27/14...T-41
$60 set up as shown w/out dado for panel
1-1/4” x 2-1/2” (thickness x width)
Moulding 176/13...T-224
$110 set up
symmetrical
fluted column simulation
13/16” x 2-9/16” (thickness x width)
aka beaded cabinet corner.
symmetrical, flute
Mldg 32/07...T-57
$110 set up
15/16” x 2-5/8” (thickness x width)
Spec gap dimension
Moulding 78/08...T-84
$100 set up
11/16” x 2-3/4” (thickness x width)
symmetrical
Moulding 65/15...T-95
$110 set up
used as cabinet corner treatment
3/4” x 2-3/4” (thickness x width)
Moulding 74/13...T-97
3/8" offset shown
$90 set up lip mould
3/4” x 2-3/4” (thickness x width)
Specify gap dimension, beaded
Moulding 75/05...T-104
$90 set up
3/4” x 2-3/4” (thickness x width)
Moulding 152/07...T-197
$60 set up as shown.
Add $30 for dado
5/8” x 2-13/16” (thickness x width)
Moulding 132/10...T-184
$110 set up
symmetrical
used for island/cabinet corners
3/4” x 2-13/16” (thickness x width)
Beaded cabinet door frame pattern. Please spec gap dimension.
Fruit
Board 26/07...T-30
$90 set up
13/16” x 2-13/16” (thickness x width)
used vertically to connect the face of cabinet boxes to the sides to sumulate beaded corners
Moulding 150/07...T-42
$110 set up
fluted
symmetrical
13/16” x 2-13/16” (thickness x width)
Specify gap dimension, beaded
Moulding 75/02...T-103
$90 set up
3/4” x 2-7/8” (thickness x width)
Beaded cabinet door frame material. Please spec gap dimension.
Moulding 01/02...T-39
$90 set up
7/8” x 2-7/8” (thickness x width)
Moulding 132/11...T-181
$110 set up
symmetrical beaded
an "inny" cabinet corner mould.
3/4” x 3” (thickness x width)
Moulding 176/12...T-227
$90 set up
specify gap dimensions
13/16” x 3+” (thickness x width)
Spec gap dimension
Moulding 36/08...T-53
$90 set up
13/16” x 3” (thickness x width)
Moulding 182/06...T-230
$100 set up
specify gap dimension
1” x 3” (thickness x width)
Moulding 154/04...T-195
$60 set up as shown
Add $30 for dado
This is typically 3/4" thick with same top pattern
1-1/16” x 3” (thickness x width)
cabinet corner molding used vertically to connect front to sides of cabinet boxes.
symmetrical
Moulding 18/09...T-26
$110 set up
13/16” x 3-1/8” (thickness x width)
Moulding 106/09...T-148
$90 set up
spec dado size
15/16” x 3-1/8” (thickness x width)
Moulding 191/13...T-242
$90 set up lip mould
3/4” x 3-1/4” (thickness x width)
Cabinet door frame pattern. Please spec gap dimension.
Moulding 14/06...T-46
$90 set up