View Mouldings by Category

#0551 Misc Moulding
1/4” x 1/2” (thickness x width)

rope moulding (1/2") in stock in red oak, soft maple, poplar, walnut,mahogany and cherry

#0645 Corner, Round, and Edge
1/2” x 1/2” (thickness x width)

typical half inch quarter round in stock in red oak
41/05
$60 set up

#0556 Corner, Round, and Edge
5/16” x 3/4” (thickness x width)

Four beaded screen mold, usually in stock in red oak, soft maple, poplar, cherry, and walnut.
41/01...T-
$70 set up
symmetrical

#0644 Corner, Round, and Edge
5/16” x 3/4” (thickness x width)

typical screen mold in stock in red oak, soft maple, mahogany, cherry and walnut.
symmetrical
also 1-1/4" screen available... see 147/06
Moulding 41/04...T-
$70 set up

#0117 Corner, Round, and Edge
3/8” x 3/4” (thickness x width)

aka 3/4" half round, red oak and soft maple in stock.
symmetrical
Moulding 08/07...T-3

We also have a 1" and a 1-1/4" half round
$7
0 set up

#0194 Door Moulding
3/8” x 3/4” (thickness x width)

Symmetrical
aka DM-5, DM5 available in stock in red oak, soft maple, honduran mahogany, walnut and cherry
Mldg 01/06 ...T-
$70 set up

#0552 Misc Moulding
3/8” x 3/4” (thickness x width)

rope moulding (3/4") in stock in red oak, soft maple, poplar, walnut, honduran mahogany and cherry

#0646 Corner, Round, and Edge
1/2” x 3/4” (thickness x width)

shoe mold for flooring or trim. In stock in red oak, mahogany, soft maple and a few other species
41/06
$70 set up.

#0115 Cove and Bed Moulding
3/4” x 3/4” (thickness x width)

typical cove in stock in red oak, soft maple, honduran mahogany, walnut and cherry
symmetrical
Moulding 09/15...T-82
$60 set up

#0555 Corner, Round, and Edge
3/4” x 3/4” (thickness x width)

outside corner in stock in red oak, soft maple, honduran mahogany, walnut and cherry
1/2" coverage
41/03...T-
OSC
$110 set up

#0647 Corner, Round, and Edge
3/4” x 3/4” (thickness x width)

also known as 3/4 quarter round. In stock in red oak, white oak, maple, mahogany and a few other species.
Mldg 41/07...T-
$60 set up

#0048 Door Moulding
1/2” x 1” (thickness x width)

Symmetrical
aka DM-9 in stock in red opak, soft maple, honduran mahogany, walnut and cherry.
Moulding 03/09...T-4
$50 set up

#0553 Misc Moulding
1/2” x 1” (thickness x width)

rope moulding (1") in stock in red oak, soft maple, honduran mahogany, walnut, poplar and cherry

#0083 Door Moulding
3/4” x 1” (thickness x width)

glass stop for 1/4" glass mounted into a 1-3/4" door.
In stock in mahogany, poplar, red oak and soft maple.
Moulding 06/06...T-8,44
$95 set up
This picture may not be exactly accurate. Raco gets it in poplar, Excel in virola with a .25" overlap...a.k.a. dm0083***

#0187 Cabinet Moulding
3/4” x 1” (thickness x width)

this pattern is our stock 1" lip mold, red oak, soft maple, poplar, honduran mahogany, walnut and cherry in stock
Moulding 14/04...T-7
$90 set up

#1485 Corner, Round, and Edge
1” x 1” (thickness x width)

Moulding 100/05...T-misc.
$125 set up
stocked only in poplar, red oak and soft maple.
Note- Not all lengths are stocked.

#0099 Panel Moulding
11/16” x 1-3/16” (thickness x width)

aka PM-5, K mldg, in stock in red oak, soft maple, honduran mahogany, walnut, poplar and cherry
Moulding 09/02...T-1
$60 set up

#0068 Corner, Round, and Edge
3/4” x 1-1/2” (thickness x width)

aka 1-1/2" half round in stock in soft maple, red oak, cherry, walnut and honduran mahogany
Moulding 05/09...T-10
Symmetrical
$60 set up

#0495 Door Moulding
3/4” x 1-1/2” (thickness x width)

aka DM-8 in stock in red oak, soft maple, honduran mahogany, walnut, poplar and cherry. Symmetrical
aka:DM8, "F" mould, F mould
board 32/14...T-57
$50 set

#0090 Handrail
1-3/8” x 1-1/2” (thickness x width)

1-1/2" full round with a 3/4" flat spot to mount to brackets for stair/wall rail. Moulding 07/06...T-10
$110 set up
Stocked only in Red Oak.
symmetrical

#0106 Cabinet Moulding
13/16” x 1-5/8” (thickness x width)

this is our stock pattern lip mould - 1-5/8" lip - with red oak, soft maple, poplar, honduran mahogany, walnut and cherry in stock
Moulding 09/06...T-2
$90 Set up
aka: CM10, CM-10

#0101 Cabinet Moulding
1” x 1-5/8” (thickness x width)

Now keeping this lip mould in stock in red oak, poplar and soft maple
Moulding 09/03...T-2
CM6, CM-6
Dekor 6
$90 set up

#0114 Cove and Bed Moulding
9/16” x 1-3/4” (thickness x width)

in stock in red oak, soft maple, mahogany, cherry and walnut.
Covers 1-1/4" x 1-1/4"
Moulding 09/14...T-1
$90 set up

#0116 Crown Moulding
9/16” x 1-3/4” (thickness x width)

in stock in poplar, soft maple, red oak, cherry, honduran mahogany, and walnut
Moulding 09/16...T-1
$110 set up

#0273 Cove and Bed Moulding
9/16” x 1-3/4” (thickness x width)

basic bed mold, in stock in red oak, soft maple, honduran mahogany, poplar, walnut and cherry
Moulding 150/13...T-15
$110 set up

#0111 Panel Moulding
3/4” x 1-15/16” (thickness x width)

our basic PM-6 (PM6) panel mold stocked in red oak, soft maple, poplar, honduran mahogany, walnut and cherry
Moulding 09/11...T10
PM-6
$90 set up

Note....5/8" offset available also....T-90
Custom setup $90.

#0045 Threshold
3/8” x 2” (thickness x width)

Typical flooring transition piece known as a saddle.
in stock in red oak and maple
Moulding 03/06...T-13
$90 set up
aka: saddle

#0044 Threshold
5/8” x 2” (thickness x width)

Stocked in red oak and maple
a.k.a. round nose
Moulding 03/05...T-6
$90 set up
3/8" offset

#0043 Threshold
3/4” x 2-1/4” (thickness x width)

This typical reducer is made to mate to most 3/4" raw flooring material.
in stock in red oak and maple
Moulding 03/04...T-13
$90 set up

#0064 Chair Rail
5/8” x 2-1/2” (thickness x width)

Moulding 05/04...T-1
AKA CR-5, CR5. This is our standard chair rail kept in stock in red oak, soft maple, honduran mahogany, walnut and cherry
$60 set up

#0071 Casing
5/8” x 2-1/2” (thickness x width)

Standard 2-1/2" colonial casing in stock in red oak, soft maple and sometimes mahogany.
Moulding 05/12...T-3
ca-8, C8
$90 set up, $60 set up without relief

#0825 Casing
5/8” x 2-1/2” (thickness x width)

Moulding 51/12...T-80
In stock in red oak, soft maple

$90 set up, $60 w/out relief

#0483 Chair Rail
1-1/16” x 2-1/2” (thickness x width)

Moulding 45/05...T-41
aka CR-7, CR7. Now in stock in red oak, poplar and soft maple.
$60 set up

#0122 Crown Moulding
9/16” x 2-3/4” (thickness x width)

standard 2-3/4 crown kept in stock in red oak, soft maple, honduran mahogany, walnut, poplar and cherry
Moulding 08/09...T-1
$110 set up
aka: 8010

#0540 Crown Moulding
3/4” x 2-3/4” (thickness x width)

this is the 2-3/4" R/D crown for rope and dentil we have in stock in red oak, soft maple, cherry, walnut, mahogany and poplar for painting.
Moulding 35/01...T-55
$110 set up

#0485 Baseboard
1/2” x 3-1/4” (thickness x width)

One of our standard bases in stock in Soft Maple and Red Oak. It is a.k.a. B-20 , B20 (also makes B21)
Moulding 32/04...T-57
$70 set up w/out relief,
over 3-1/4" add $30

#0107 Baseboard
9/16” x 3-1/4” (thickness x width)

aka colonial base in stock in red oak and soft maple
$60 set up w/out relief,
LSB8 and LSB9
over 3-Moulding 09/07...T-6
1/4" add $30
a.k.a. B8

#0643 Baseboard
9/16” x 3-1/4” (thickness x width)

typical sanitary base available in stock in soft maple and red oak
41/02...T-8
$60 set up w/out relief,
over 3-1/4" add $30

#0076 Casing
5/8” x 3-3/8” (thickness x width)

aka c-10, a basic fluted casing stocked in red oak and soft maple, usually used with corner blocks or rosettes. We have texas star rosettes in stock.
symmetrical
Mldg 06/03...T-45
$60 set up