Search by Moulding Type

used on the bottom of cabinet doors for a finger pull
Moulding 01/01...T-17
$110 set up

Beaded cabinet door frame material. Please spec gap dimension.
Moulding 01/02...T-39
$90 set up

Moulding 01/03...T-39
one bead
$60 set up

Moulding 01/04...T-11
$60 set up

Moulding 01/05...T-45 degrees
$110 set up
symmetrical

aka CR-6
moulding 01/06...T-22
$90 set up

Moulding 01/07...T-22
aka bmc-50, bmc50
$150.00 set up
add $.60 per foot to run it twice....quote 8/4 price

Moulding 01/08...T-19
$70 set-up

wall cap, symmetrical
Moulding 01/09...T-19
$135 set up

symmetrical, Beaded
Moulding 01/10...T-19
$60 set up

Very narrow KP-44 siding shown in ship lap form...can be any width specified. Beaded
Moulding 02/11...T-8
$110 set up

Moulding 02/10...T-6
$125 set up

aka a true 2-1/2" half round
symmetrical
Moulding 02/09...T-6
$60 set up

Moulding 02/08...T-3
$90 set up

can be made without dado
Moulding 02/07...T-8
$90 set up

Moulding 02/06...T-4
$160 set-up

Moulding 02/05...T-4
$110 set up

symmetrical, beads
Moulding 02/04...T-3
$60 set up

aka 1-1/16" cove
Moulding 02/03...T-8
$70 set up

fancy screen with 5 beads. Beaded, symmetrical
Moulding 02/02...T-5
$60 set up

Moulding 02/01...T-17
$110 set up

tall DM-3
Moulding 03/01...T-5
$60 set up

aka two-step base
Moulding 03/02...T-13
$60 set up

This typical reducer is made to mate to most 3/4" raw flooring material.
in stock in red oak and maple
Moulding 03/04...T-13
$90 set up

Stocked in red oak and maple
a.k.a. round nose
Moulding 03/05...T-6
$90 set up
3/8" offset

Typical flooring transition piece known as a saddle.
in stock in red oak and maple
Moulding 03/06...T-13
$90 set up
aka: saddle

Moulding 03/07...T-13
similar to LSDM130
$60 set up

symmetrical
Moulding 142/07...T-13
$110 set up

Symmetrical
aka DM-9 in stock in red oak, soft maple, honduran mahogany, walnut and cherry.
Moulding 03/09...T-4
$50 set up

dado can be varied
Moulding 03/10...T-4
aka LSPM1 pm-1
$90 set up

Moulding 03/11...T-8
$60 set up

Moulding 03/12...T-8
$70 set-up

symmetrical
Moulding 04/01...T-15
$9100 set up

3-1/4" net face. Beaded
Moulding 04/02...T-15
$110 set up

Moulding 04/03...T-5
$60 set up

Moulding 04/04...T-5
one bead
$70 set up
add $30 for dado

Moulding 04/05...T-5
$90 set up, $60 without relief

Moulding 04/06...T-21
$70 set-up

Moulding 04/07...T-21
$70 set up
center dado is for a rope moulding

Moulding 04/08...T-5
$70 set up

symmetrical
Moulding 04/09...T-21
$70 set up, ad .30 per foot to run twice.

aka boren moulding
05/01...T-2
$60 set up

Moulding 05/02...T-2
$60 set up
an old Boren Mldg

Moulding 05/03..T-2
$60 set up

Moulding 05/04...T-1
AKA CR-5, CR5. This is our standard chair rail kept in stock in red oak, soft maple, honduran mahogany, walnut and cherry
$60 set up

Moulding 05/06...T-1
$90 set up
specify dado dimensions

aka c211 or b211...T-16
Moulding 05/07
$60 set up for 2-1/2 casing, $70 set up when it is wider than 2-1/2" (typically the base)

symmetrical
Moulding 05/08...T-1
$60 set up

aka 1-1/2" half round in stock in soft maple, red oak, cherry, walnut and honduran mahogany
Moulding 05/09...T-10
Symmetrical
$60 set up

two step casing
Moulding 05/10...T-10
$90 set up, $60 w/out relief

aka wedge casing.

Moulding 05/11...T-16
$90 set up, $60 w/out relief
aka LSC2

Standard 2-1/2" colonial casing in stock in red oak, soft maple and sometimes mahogany.
Moulding 05/12...T-3
ca-8, C8
$90 set up, $60 set up without relief

Known as the Four-beaded casing.
symmetrical
Moulding 05/13...T-2
$60 set up

standard 4-1/4 crown avialable in stock in soft maple, red oak, honduran mahogany, walnut, poplar and cherry
Moulding 05/14...T-1
$110 set up
aka: LS48, BMC48, 8012

standard 3-5/8 crown in stock in red oak, soft maple, honduran mahogany, walnut, poplar and cherry
Moulding 05/15...T-10
$110 set up
aka: BMC49, 8009

dado can be spec d
Moulding 06/01...T-3
$90 set up

aka c-10, a basic fluted casing stocked in red oak and soft maple, usually used with corner blocks or rosettes. We have texas star rosettes in stock.
symmetrical
Mldg 06/03...T-45
$60 set up

A two-piece casing for very old homes
Moulding 06/03...T-45
two set-ups, $90 and $60

aka LS c-9, C9
Moulding 06/04...T-45
$90 set up, $60 w/out relief
symmetrical, little beads

Moulding 07/01...T-7
Similar to the B-20
$60 set-up

aka 5-bead casing.
symmetrical Beaded
Moulding 07/02...T-3
$60 set up

Moulding 06/06...T-45
$90 set up

Moulding 07/03...Dedicated knives
typical t & g siding or flooring
$110 set up

glass stop for 1/4" glass mounted into a 1-3/4" door.
In stock in mahogany, poplar, red oak and soft maple.
Moulding 06/06...T-8,44
$95 set up
This picture may not be exactly accurate. Raco gets it in poplar, Excel in virola with a .25" overlap...a.k.a. dm0083***

this was used as a bumper rail for a boat maker
Symmetrical
Moulding 07/04...T-1
$90 set up

aka 1-1/2" bullnose, can be any different height
Moulding 06/07...T-10
Symmetrical
$60 set up

105 siding
Moulding 06/08...T-15
$100 set up

top portion shown in detail...can be any height
Moulding 06/09...T-15
$70 set-up

Moulding 06/10...T-10
$60 set up
Shown with relief...add $30

Moulding 07/05...T-9
Two knife set-up...$110

1-1/2" full round with a 3/4" flat spot to mount to brackets for stair/wall rail. Moulding 07/06...T-10
$110 set up
Stocked only in Red Oak.
symmetrical

7 " tear-dropped siding
Moulding 07/07...T-3
$90 set up

glass stop used to mount 1/4" glass into a 1-3/4" door
Moulding 06/11...T-
$75 set up

Moulding 07/08...T-9
$60 set up

aka 2" bullnose...1-1/4" tall.
tall two inch half round
Moulding 07/09...T-1
$60 set up
Symmetrical
This is the same knife used for a 2" half round; $60 set up

This is a wide fluted moulding used with large rosettes. It can be wider or narrower if needed.
You are able to order the rosettes to match any patters.
symmetrical
moulding 07/10...T-2
aka LS fluted pilaster
$60 set up

Moulding 08/02...T-29
Very small for our moulder, difficult to run; 50ft in, 30ft out. random length orders only extra set up...$90

Moulding 09/01...T-16
$60 set up

Moulding 08/03...T-3
aka BMC83
$110 set up

aka PM-5, K mldg, in stock in red oak, soft maple, honduran mahogany, walnut, poplar and cherry
Moulding 09/02...T-1
$60 set up

goes with [BBRDM0102]
symmetrical
Moulding 08/04...T-3
$110 set up
add $30 for the relief

Now keeping this lip mould in stock in red oak, poplar and soft maple
Moulding 09/03...T-2
CM6, CM-6
Dekor 6
$90 set up

goes well with [CHRRM0100]
Moulding 08/05...T-3
large bead
Two knife base...$70 set up.
Relief is $30 more

aka cochran molding
3/4" off set
Moulding 09/04...T-125
$90 set up

aka B422 & C422
Moulding 09/05...T-2
$60 set up

wall rail mounted with brackets or to another board
Moulding 143/04...T-6, T-10
$110 set up

this is our stock pattern lip mould - 1-5/8" lip - with red oak, soft maple, poplar, honduran mahogany, walnut and cherry in stock
Moulding 09/06...T-2
$90 Set up
aka: CM10, CM-10

aka colonial base in stock in red oak and soft maple
$60 set up w/out relief,
LSB8 and LSB9
Moulding 09/07...T-6
Over 3-1/4" add $30
a.k.a. B8

Moulding 09/08...T-10
$60 set up

aka 5/8" qtr round
Moulding 09/09...T-13
$70 set up

aka clover, discontinued as s t o c k item.
symmetrical
Moulding 09/10...T-10
$70 set up

our basic PM-6 (PM6) panel mold stocked in red oak, soft maple, poplar, honduran mahogany, walnut and cherry
Moulding 09/11...T10
PM-6
$90 set up

Note....5/8" offset available also....T-90
Custom setup $90.

aka mantle mold
Moulding 09/12...T-7
aka MM1
$70 set up

Moulding 09/13...T-17
$70 set up

in stock in red oak, soft maple, mahogany, cherry and walnut.
Covers 1-1/4" x 1-1/4"
Moulding 09/14...T-1
$90 set up

typical cove in stock in red oak, soft maple, honduran mahogany, walnut and cherry
symmetrical
Moulding 09/15...T-82
$60 set up

in stock in poplar, soft maple, red oak, cherry, honduran mahogany, and walnut
Moulding 09/16...T-1
$110 set up

aka 3/4" half round, red oak and soft maple in stock.
symmetrical
Moulding 08/07...T-3

We also have a 1" and a 1-1/4" half round
$7
0 set up

2" radius
Moulding 08/08...T-6
$60 set up
symmetrical

Moulding 10/01...T-14
$70 set up

aka LSC346
Moulding 10/02...T-23
$70 set up

this picture shows a 1/4" offset for a beaded panel cap. If you need this for lip moulding specify 3/8" offset.
Moulding 10/03...T-14
$90 set up

standard 2-3/4 crown kept in stock in red oak, soft maple, honduran mahogany, walnut, poplar and cherry
Moulding 08/09...T-1
$110 set up
aka: 8010

aka one-step base
Moulding 10/04...T-10
$70 set up

Moulding 08/11...T-9
$60 set-up

wall cap
symmetrical
Moulding 10/06...T-10
$90 set up

symmetrical
Moulding 08/12...T-16
$110 set up

Moulding 10/07...T-4
small mouldings are more time consuming so quote a $90 set up. Do not promise particular lengths...only total footages because it is fragile and we don t want to trash a whole pc. because it breaks off 6 inches from one end.

dado can be changed
Moulding 10/08...T-14
$90 set up

Moulding 10/09...T-14
$85 set up
Note left side is slanted.

has built in shoe mold
Moulding 10/11...T-14
large bead
$70 set up
add $30 for dado

can be any height
symmetrical
Moulding 08/13...T-26
$60 set up

3" radius on concave molding
symmetrical
Moulding 08/14...T-9
$70 set up

smaller section of the four beaded casing
Moulding 12/01...T-2
symmetrical
$60 set up

Simulated log cabin siding
Moulding 12/02...T-16
$90 set up

used at the bottom of cabinet doors as a finger pull for full overlay doors
Moulding 12/03...T-16
$110 set up

Moulding 12/04...T-44
$125 set up
note the rounded corners

used on plywood with an offset of 1/2" to 3/4". Not the s.t.o.c.k PM6
Moulding 12/05...T-11
$90 set up

Moulding 12/06...T-45
$60 set up

aka 1" full round
Moulding 12/08...T-13
We have the tooling to make 1-1/4", 1-1/2", 1-5/8", 1-3/4", 2" diameter full rounds also.
all full rounds are $150 set ups.

aka picture mold.
Moulding 12/09...T-44
$90 set up

symmetrical
Moulding 12/10...T-44
$110 set up or $60 with no dados

used as cabinet door frames
Moulding 12/11...T-44
$85 set up shown w/out dado for panel...too small for 1/4" dado for panel

symmetrical
Moulding 13/01...T-19
tiny beads
$60 set up

custom lip mould
Moulding 13/02...T-4
$90 set up

aka 1-1/2" qtr round
Moulding 12/12...T-19
$110 set up

2" quarter round set up is $125 set up.

dado can be specified to any dimension.
symmetrical
Moulding 13/03...T-18
$90 set up

Moulding 12/07...T-44
$70 set up

extreme bed
Moulding 13/04...T-18
$110 set up

3/4" off set
Moulding 13/05...T-18
$110 set up

this was used for a porch wall panel where you can see the beaded pattern from both sides. Comes from 2 x 4 material.
Moulding 13/06...T-15
$120 set up plus we run it twice, therefore add another .30 per foot to foot price

Moulding 13/07...T-19
$110 set up

aka 3" half round, and can be any height, which turns it into a bullnose if the height is more than 1-1/2".
Moulding 13/08...T-19
set up $150...three knives...difficult
symmetrical
A few misc sizes, misc species in stock.

this was used as a base to insert 1/2" glass making a glass wall
symmetrical
Moulding 13/09...T-9
$90 set up
Moulding 13/09

this was used for the top of a 1/2" glass handrail, symmetrical
Moulding 13/10...T-19
$195 set up

wall rail or banister cap, dado can be specified
Moulding 13/11...T-19
$135 set up
symmetrical

Moulding 11/01...T-18
$60 set up

yes, it is irregular
Moulding 11/02...T-12
$60 set up

Moulding 11/03...T-9, 45`
Two knife set-up...$110

this is just a portion of a wide fluted moulding up to 9" wide
Moulding 11/04...T-11
$85 set up

Moulding 11/05...T-12
$60 set up

Moulding 11/06...T-10
$60 set up
PM-6 without the bottom knife

any chair rail can be made thicker and a notch put in to accept paneling or waincoat making it a panel cap like this one shown.
Moulding 11/07...T-8
$85 set up

Moulding 10/10...T-14
$60 set up

Moulding 11/08...T-9,89
$110 set up...three knives

Moulding 11/10...T-16
$90 set up

Moulding 11/11...T-12
$180 set up

Moulding 11/12...T-35
$110 set up

Moulding 14/01...T-44
$60 set up

could be panel cap or picture frame molding
dado can be spec d
Moulding 14/02...T-3
$90 set up

Moulding 14/03...T-16
$70 set up

this pattern is our stock 1" lip mold, red oak, soft maple, poplar, honduran mahogany, walnut and cherry in stock
Moulding 14/04...T-7
$90 set up

note the bevel and curve on same piece
Moulding 15/01...T-14
$100 set up

Moulding 14/05...T-16
$60 set up

Cabinet door frame pattern. Please spec gap dimension.
Moulding 14/06...T-46
$90 set up

Moulding 14/07...T-45
$60 set up

Moulding 14/08...T-45
similar to DM3
$60 set up

Moulding 14/09...T-6
$60 set up
Symmetrical

Symmetrical
aka DM-5, DM5 available in stock in red oak, soft maple, honduran mahogany, walnut and cherry
Mldg 01/06 ...T-
$70 set up

Typical large crown
Moulding 14/11...T-45
$110 set up

Moulding 15/02...T-23
$90 set up

Moulding 14/12...T-21
similar to B514
$70 set up

unusually plump casing
Moulding 14/13...T-21
$90 set up, $60 w/out relief

Plump casing
Moulding 145/03...T-21
$60 set up

Moulding 15/04...T-11
$70 set up

dado can be spec d
Moulding 15/05...T-29
Symmetrical
$110 set-up

Moulding 15/06...T-18
$70 set up

Moulding 149/10...T-23
set up $110

Moulding 15/07...T-19
similar to CM1 too
$60 set up

wall/stairs rail mounted with brackets to wall
Moulding 16/02...T-10
$100 set up
symmetrical

rope or dentil molds can be added to flat spot. We have both in house.
mldg 15/08...T-12
$125 set up

a style of handrail used between newel posts and spindles below
Moulding 16/04...T-23
add .40 to run twice, set up $90
symmetrical

bar rail
Moulding 16/04...T-39
$150 set-up
price 8/4 stock
3/4 x 2-5/8 offset

bed
Moulding 15/09...T-17
$110 set up

can be used as large as 8-1/2" wide flutes.
symmetrical
Moulding 15/11...T-12
fluted
increments at 3.25, 4, 4.75, 5.5 etc.
$85 set up

Just a squared nosing for front of stair treads.
Can be made to mate to most floors
Moulding 16/05...T-23
$110 set up

Moulding 15/10...T-11
$110 set up

wall or railing cap. Bottom can have any size dado for your application
Moulding 16/06...T-23
symmetrical
$135 set up

standard shape as other handrails. The width is changeable for your application
Moulding 16/07...T-23
aka 6010 (2-3/8" x 2-1/4") and 6210 (2-3/8" x 2-7/8")
$110 set up, add .40 to run twice.
symmetrical

Ideal for adding rope or dentil mould, both in stock. This is a 4-1/4" R/D crown in stock in red oak, soft maple, mahogany,walnut, cherry, and poplar.
Mldg 16/08...T-38
$110 set up

dado can vary in size
Moulding 16/10...T-38
$110 set up

Moulding 16/11...T-38
$60 set up

Moulding 16/12...T-38
$150 set up
Add $.60 for having to run twice

Moulding 141/07...T-38
$60 set up

Moulding 141/09...T-38
$85 set up

Moulding 140/09...T-33
$110 set up

Moulding 17/01...T-40
$60 set up

Moulding 17/02...T-26
$70 set-up

Two pc moulding for old style house trim
Moulding 17/03...T-42
set up $85 each piece

Moulding 18/01...T-26
$60 set up

used as a tall shoe mold
Moulding 17/04...T-42
$70 set-up

wall rail mounted to brackets or 2 x 2 s. Overall dimensions are flexible
Moulding 18/02...T-
as shown with all the rounded corners...$150 set up

symmetrical
Moulding 17/05...T-42
$60 set up

this gives a v-joint; thin stock has to be lap joint instead of tongue and groove
Moulding 18/03...T-
$110 set up

1" lip mold but can also be used for picture frame material
beaded lip
Moulding 17/06...T-38
$90 set up

symmetrical
Moulding 17/07...T-33
$60 set up

Moulding 18/04...T-26
$60 set up

Moulding 17/08...T-23
beaded, symmetrical
$60 set up

Moulding 18/05...T-26
$110 set up

Moulding 17/09...T-33
beads
$60 set up

Moulding 17/10...T-33
$60 set up

Moulding 18/06...T-
$110 set up

custom lip mold
Moulding 17/11...T-33
aka LSCM11
$90 set up

Beaded cabinet door frame pattern. Please spec gap dimension.
Moulding 143/08...T-26
$90 set up

Moulding 18/08...T-26
$60 set up

Moulding 17/12...T-33
$60 set up, $90 with relief

cabinet corner molding used vertically to connect front to sides of cabinet boxes.
symmetrical
Moulding 18/09...T-26
$110 set up

Moulding 17/13...T-33
$70 set-up

bar rail
Moulding 148/15...T-
$215.00 set-up

1 x 6, 5-1/8 net face. Beaded
Moulding 147/03...T-33
$110 set up

Symmetrical
Moulding 18/11
aka DM1
$60 set up

Moulding 149/03...T-33
$90 set up

used vertically to connect the face of cabinet boxes to the sides to sumulate beaded corners
Moulding 150/07...T-42
$110 set up

fluted
symmetrical

Moulding 150/01...T-42
aka C347
$70 set up
add $30 for relief

designed for table edge
Moulding 149/08...T-38
$125 set up

Moulding 146/07...T-38
$110 set up

bed
Moulding 150/15...T-42
$110 set up

custom lip mould
Moulding 150/09...T-42
aka LSCM12
$90 set up

Moulding 150/10
$60 set up

Symmetrical
Moulding 19/01...T-40
$75 set up

just another custom shoe mold
Moulding 19/02...T-40
$70 set-up

Moulding 19/03...T-40
$60 set up

Moulding 19/04...T-31
$60 set up

Moulding 20/01...T-35
$60 set up
add $30 for dado

Moulding 19/05...T-24
$90 set up

Moulding 19/06...T-31
$60 set up

Moulding 20/02...T-37
$70 set up
add $30 for dado

mount on a 2 x 2 to a wall for hallway handrail. Changes in thickness or heights are easily customized Moulding 19/07...T-31,26,10
as shown...$150 set up

thin stock needs to be lap jointed. Shown is a deep v with thin lapping.
Moulding 19/09...T-
45 degrees

$110 set up

Moulding 20/03...T-37
beads
$60 set up

symmetrical
Moulding 19/10...T-24
$60 set up

Moulding 19/11...T-24
$110 set up

Moulding 19/12...T-24
similar to CM1
$60 set up

Moulding 20/04...T-25
$70 set up

Moulding 19/13...T-24
$70 set up
symmetrical

Moulding 19/14...T-24
$60 set up
Dado on bottom and relief add $30 each.

basic bed mold, in stock in red oak, soft maple, honduran mahogany, poplar, walnut and cherry
Moulding 150/13...T-15
$110 set up

Moulding 20/05...T-25
$70 set up

Moulding 147/07...T-24
$60 set up

Moulding 141/11...T-24
$110 set-up

Moulding 20/06...T-31
aka C295
$80 set up for either one
add $30 for dado

KP-44 style tongue and groove. Widths can be specified, usually varying. Beaded
Moulding 20/07...T-37
$110 set up

OSC
Moulding 143/13...T-24
$150 set up

1/4" tab fits into dado around deck/table surfaces
Moulding 19/19...T-13
Symmetrical
$110 set up

Moulding 20/08...T-35
$70 set up

old fashioned crown mould, typically found in older homes
Moulding 141/10...T-24
$110 set up

Beaded cabinet door frame pattern. Please spec gap dimension.
Moulding 19/21...T-26
$110 set up (note the beveled back)

Moulding 20/09...T-misc
$90 set up add $30 for dado
Symmetrical

Moulding 20/10...T-25
$70 set up

Moulding 149/06...T-25
$70 set up

Moulding 149/07...T-31
$90 set up
beads, symmetrical

can be made with or without scribing dado
Moulding 149/01...T-35
$60 set up
add $30 for dado

Moulding 146/06...T-35
$70 set-up

Moulding 150/11...T-31
$60 set up

slightly different than PM-5
Moulding 149/05...T-25
$60 set up

Moulding 148/04...T-25
$60 set up

beaded board...tongue and groove. It comes from 1 x 4
Moulding 21/01...T-25
$110 set up

dado can be varied, double beaded
Moulding 21/02...T-31
$110 set up

very old casing usually used with rosettes and plinth blocks, symmetrical
Moulding 21/03...T-31
$60 set up

wide casing in older homes, used with rosettes usually.
symmetrical
Moulding 21/04...T-31
$70 set up

flooring made to match hard to find size
Moulding 21/05...T-32
all tongue and grooves are $110 set-up

Moulding 21/06...T-37
$110 set up
symmetrical

Moulding 21/07...T-35
$110 set up

this crown mounts to the top of cabinets in the orientation shown, not the front of cabinet
Moulding 21/08...T-35
$110 set up

Moulding 21/09...T-35
$110 set up

Moulding 21/10...T-31
$110 set up

Moulding 21/11...T-35
$150 set up
add $.60 per foot for having to run twice

Moulding 140/08...T-35
$110 set up

Moulding 142/12...T-37
$125 set up

Moulding 148/17...T-25
$110 set up

this is a cradle mould...used with another for a compound molding
Moulding 144/04...T-25
$90 set up

panel cap
dado can be spec
Moulding 148/14...T-35
$90 set up

Moulding 147/08...T-25
aka BMC203, (OSC)
$120 set up
price as 1-1/8 X 1-5/8 (6/4 stock)

Moulding 22/01...T-35
nice mantle treatment
$110 set up

this was a custom moulding and duplication requires a $180.00 set-up fee
Moulding 22/02...T-38
$180 set up (two setups to do it)

Moulding 22/04...T-37
$90 set up

dado can be spec d
Moulding 22/05...T-misc.
$110 set up

another custom lip mold
Moulding 22/06...T-35
$90 set up

Moulding 22/07...T-31
$110 set up

This angle may have been changed. Recommend bring sample.

Moulding 22/08...T-35
$60 set up

Moulding 22/09...T-31
$60 set up

Moulding 22/10...T-37
$60 set up

Moulding 22/11...T-35
$60 set up

symmetrical
Moulding 22/13...T-37
$90 set up

Moulding 22/14...T-37
$125 set up, four knives

Moulding 22/15...T-31
$70 set up

dado can be any size
Moulding 142/08...T-29
$90 set up

Moulding 145/08...T-37
aka DM130
$60 set up

Moulding 149/09...T-29
$60 set up

this tongue and groove plank assembled makes panels with nothing but beads....very interesting. Beaded
Moulding 147/04...T-29
$110 set up

slightly different tham PM-5
Moulding 150/03...T-29
$60 set up

Moulding 145/07...T-29
$70 set up

Moulding 23/02...T-29
$60 set up

custom lip mould
Moulding 23/03...T-28
$90 set up

Moulding 23/04...T-28
$60 set up

panel cap...dado can be varied.
Moulding 23/05...T-29
$110 set up

used to make cabinet door frames...shown without 1/4" dado for panel
Moulding 23/06...T-28
$60 set up as shown...add $30 with dado

Moulding 23/07...T-28
edge beads
$60 set up

This is a very wide casing for older houses.
symmetrical
Moulding 23/08...T-32
$60 set up

Moulding 24/02...T-32
$90 set up

very old style used with rosettes on corners
symmetrical, beads
Moulding 23/09...T-28
$60 setup

Dado can be any size.
symmetrical
Moulding 24/03...T-28
$90 set up

symmetrical
Moulding 23/11...T-32
$90 set up

aka a true 3-1/2" half round
symmetrical
Moulding 24/04...T-40
$150...three knives...difficult set up

We can also make a 4" half round; same set up; price 10/4 or 12/4

covers 2" ceiling and 3" of wall
Moulding 23/12...T-32
$110 set up

5" tear-dropped siding
Moulding 24/05...T-32
this one has to come from 4/4" stock
$90 set up

Moulding 23/13...T-28
$110 set up

Moulding 24/06...T-32
Two knife base...$70 set up

Moulding 150/14...T-28
aka BMC15
$110 set up

Moulding 24/07...T-28
Two knife base...$70 set up. Dado on bottom and relief cuts add $30 each.

Moulding 24/08...T-32
Two knife set up...$70

Moulding 146/11...T-29
$110 set up

Moulding 146/01...T-60
$60 set up
if any spacing of bevels are changed, the set up $ will change too.

Moulding 146/10...T-32
aka BMC595
$110 set up

aka tall colonial base
Moulding 148/01...T-28
aka LSB9
$70 set up

Moulding 145/09...T-29
$110 set up
susan fruit

Moulding 25/01...T-40
one bead
$60 set up

symmetrical
Moulding 25/02...T-36
$70 set up

panel cap
dado can be spec d
Moulding 25/03...T-36
$90 set up

Moulding 25/04...T-36
$60 set up

Moulding 25/05...T-36
$60 set up

dado can be varied
Moulding 25/06...T-36
$90 set up

Moulding 25/07...T-41
$70 set-up

Moulding 25/08...T-41
$60 set up
also a base board from same knife...$70 set up

dado can vary in size
Moulding 25/09...T-30
$90 set up

Moulding 25/10...T-41
$60 set up

Beaded cabinet door lip mould
Moulding 25/11...T-26
$90 set up

Moulding 25/12...T-41
$60 set up

Moulding 25/13...T-30
$60 set up

Moulding 25/14...T-30
$60 set up

another old style two-step casing
Moulding 25/15...T-41
$90 set up, $60 w/out relief

Moulding 25/16...T-41
$60 set up

Moulding 150/06...T-41
beaded symmetrical
$60 set up

a short portion is also used as plinth block
Moulding 140/01...T-43
$70 set up

Moulding 26/01...T-36
$60 set up

Moulding 146/06...T-43
$70 set up

tear dropped siding
comes out of a 1 x 4
Moulding 26/02...T-36
$90 set up

Moulding 26/03...T-36
$60 set up

Moulding 26/04...T-30
$60 set up

Moulding 26/05...T-36
$60 set up

cabinet door frame pattern. Please spec gap dimension.
Moulding 26/06...T-36
$110 set up

Moulding 143/09...T-43
$60 set up

Beaded cabinet door frame pattern. Please spec gap dimension.
Fruit

Board 26/07...T-30
$90 set up

Moulding 26/08...T-40
$60 set up

5-1/4" net face coverage
Moulding 26/09...T-36
$110 set up

chalk rail
Moulding 26/10...T-36
$110 set up

Moulding 26/11...T-36
Two knife base...$70 set up

Moulding 26/12...T-36
$70 set up

Moulding 150/16...T-30
$110 set up

susan fruit

Moulding 150/05...T-36
$60 set up

Moulding 146/04...T-40
$90 set up

Moulding 145/12...T-30
$125 set up
add $.60 per foot for having to run it twice

Moulding 27/01...T-34
$60 set up

Moulding 27/03...T-34
$60 set up

Moulding 27/04...T-31
Two knife base or cradle...$70 set up

tab size can be spec d
Moulding 27/05...T-34
$90 set up

Moulding 27/06...T-34
$60 set up

symmetrical
Moulding 27/07...T-41
$70 set up add $.030 if running twice

Moulding 27/08...T-34
aka LSCR2
$60 set up

thin good two sides v-groove siding can be tongue and grooved but with shallow v
Moulding 27/09...T-44
Add $.30 per foot
$150 set up

not a true half round
symmetrical
Moulding 27/10...T-34
$60 set up

dado can be varied
Moulding 27/11...T-34
$90 set up

Moulding 27/12...T-6
$70 set-up

old fashioned full corner crown
Moulding 27/13...T-40
$70 set up

another door frame mld shown w/out dado for panel
Moulding 27/14...T-41
$60 set up as shown w/out dado for panel

Beaded cabinet door frame pattern. Please spec gap dimension.
Moulding 27/15...T-41
$90 set up

Moulding 27/16...T-43
$60 set up

Moulding 27/17...T-31
$60 set up

Moulding 146/03...T-43
symmetrical
$60 set up

Moulding 148/08...T-34
$60 set up

Moulding 148/02...T-43
big bead
$60 set up

can be used as a column simulation
Moulding 150/08...T-34
symmetrical, fluted cabinet corner
$60 set up

narrower widths available
Moulding 28/01...T-9
three knife set up...$110

casing for very old houses, normally used with rosettes.
symmetrical
beaded
Moulding 28/02...T-34
$70 set up

Moulding 29/01...T-20
$110 set up (3 Knives)

symmetrical
Moulding 29/02...T-27
$90 set up

Moulding 28/03...T-34
$70 set up

Moulding 28/04...T-34
$70 set up

symmetrical, two flutes
Moulding 29/03...T-51
$70 set up

Moulding 28/05...T-41
large bead
$70 set up add relief $30

dado can be varied
Moulding 29/04...T-20,26
as shown $110 set up

Moulding 28/06...T-43
$70 set up, add $30 for dado

Moulding 29/05...T-51
$70 set up

double humped...very unique bead
Moulding 28/07...T-20
$60 set up

Moulding 28/08...T-43
$60 set up

Moulding 28/09...T-20
$90 set up

Moulding 147/01...T-41
$70 set up

Moulding 29/06...T-51
$90 set up

Moulding 29/07...T-27
$60 set up

Moulding 146/09...T-20
$110 set up

Moulding 143/15...T-35
$150 set up
add $.60 per foot for having to run twice
t15,t35,30*

Moulding 29/08...T-51
$110 set up

Moulding 29/09...T-27
$70 set up

Moulding 29/10...T-27
$110 set up

symmetrical
Moulding 29/11...T-34 see 57/05 too
Set-up charge is $180.00 because deep 45 degree angles. Add .60 per foot for two passes (deep cutout)

Moulding 31/01...T-27
aka LSCR1
$60 set up

Moulding 149/12...T-27
$135 set up

aka one step casing
Moulding 31/02...T-54
$90 set up, $60 without relief

A dentil or rope mould may be added to the flat spot on this moulding. Dentils and ropes are available in house.aka BMC-40

Moulding 146/12...T-51
$110 set up

Moulding 31/03...T-27
$80 set up

Moulding 148/16...T-27
$110 set up

Moulding 146/05...T-27
$60 set up

aka beveled base
Moulding 31/04...T-54
$60 set up add relief $30

Moulding 31/05...T-51
$70 set up

Moulding 31/06...T-17
$70 set up
AKA: CM3, CM-3

full cornered crown
Moulding 31/07...T-51
$60 set up

Three beaded cove
Moulding 31/08...T-54
aka three-bead cove
$60 set up

Moulding 31/09...T-54
$90 set up

tall, narrow shoe mold
Moulding 30/01...T-49
$70 set up

Moulding 31/10...T-54
Beaded, symmetrical
$60 set up

Moulding 30/02...T-54
$70 set up

Moulding 31/11...T-23
$60 set up

Moulding 31/12...T-20
$60 set up
add $30 for dado

used to simulate beaded casing, can be made thicker for more definition.
symmetrical
Moulding 31/13...T-54
$70 set up

aka LSCR3
Moulding 31/14...T-54
aka LSCR3
$60 set up

Moulding 30/03...T-54
$110 set up

used around the 3/4" plywood for cabinet doors
Moulding 31/15...T-54
$150 set up

Moulding 30/04...T-49
$60 set up

Moulding 31/16...T-5
$70 set-up

Moulding 31/17...T-34
$60 set up

Moulding 144/05...T-49
$60 set up, add $30 for dado

Similar to Bison DP
Moulding 30/05...T-49
$60 set up

old fashioned crown
Moulding 147/10...T-51
$110 set up

Moulding 30/06...T-51
one bead
$60 set up
add $30 for dado

2-1/8" radius, thickness can be varied
Moulding 30/07...T-49
Symmetrical
$60 set up

used around the perimeter of 5/8" plywood used for cabinet doors.
Moulding 144/08...T-54
$110 set up

Moulding 30/08...T-49
$60 set up

Moulding 142/11...T-1
$110 set up

Moulding 144/06...T-41
$70 set up

Moulding 143/11...T-10
Symmetrical
$60 set up

dado can be spec d
Moulding 30/09...T-54
$90 set up

shown with rounded bottom but base doesnt need it.
Moulding 30/10...T-54
aka B395 or B695
$60 set up

Moulding 30/11... T-51
$70 set up, dado on bottom adds $25

Moulding 30/12...T-54
center bead
$60 set up

symmetrical
Moulding 30/13...T-54
lots of beads
$60 set up

Moulding 140/05...T-51
$110 set up, specify widths, usually varying.

Moulding 141/06...T-51
$60 set up

Moulding 144/09...T-27
$60 set up

Moulding 142/01...T-51
Two knife base...$70 set up

wainscott cap
dado can be spec d
Moulding 32/01...T-57
$90 set up

Moulding 45/05...T-41
aka CR-7, CR7. Now in stock in red oak, poplar and soft maple.
$60 set up

Moulding 32/03...T-49
$85 set up

One of our standard bases in stock in Soft Maple and Red Oak. It is a.k.a. B-20 , B20 (also makes B21)
Moulding 32/04...T-57
$70 set up w/out relief,
over 3-1/4" add $30

dado can be spec d
Moulding 32/05...T-49
$90 set up

Stair nosing or starter piece..can have many different dimensions
Moulding 32/06...T-misc.
Usually made custom to mate to your flooring supplied
$110 set up

aka beaded cabinet corner.
symmetrical, flute
Mldg 32/07...T-57
$110 set up

used for cabinet door frame material. Please spec the gap dimension.
Moulding 32/08...T-57
$90 set up

tall B-8 baseboard, cheaper without the dado in the back
Moulding 32/12...T-57
$70 set up
add $30 for dado

Moulding 32/10...T-
$110 set up

Moulding 32/11...T-30
$90 set up

Moulding 32/09...T-57
$90 set up

Red oak and maple nosing in stock. This is made to mate to most existing 3/4" unfinished flooring.
Moulding 32/13...T-misc.
$135 set up

aka DM-8 in stock in red oak, soft maple, honduran mahogany, walnut, poplar and cherry. Symmetrical
aka:DM8, "F" mould, F mould
board 32/14...T-57
$50 set

used as an edge around a piece of plywood to make a table top
Moulding 143/05...T-43
$110 set up

2-1/4 crown with no angles cut
Moulding 140/07...T-49
$60 set up

Moulding 32/17...T-46
$60 set up
large screen

a fruit under cabinet mldg
Moulding 148/05...T-57
$70 set up

this is an enlarged PM-5
Moulding 142/06...T-2
Two knife set-up...$90

Moulding 33/01...T-49
$60 set up
symmetrical

moulding 33/02...T-49
$60 set up

Moulding 33/03...T-57
$90 set up

symmetrical
Moulding 33/04...T-49
$85 set up

Very unique siding. It appears to be curved planks side by side by side.
Moulding 33/05...T-57
$110 set up

Moulding 33/06...T-49
$90 set up
beaded

Moulding 33/07...T-23
$70 set up

Moulding 33/08...T-48
one bead
$70 set up

Moulding 33/09...T-49
$60 set up

Moulding 33/10...T-56
$110 set up

Moulding 33/11...T-48
$150.00 set-up
add $.60 per foot for having to run it twice

Moulding 143/16...T-55
$125 set up

Moulding 148/07...T-57
$70 set up

Moulding 140/03...T-51
one bead
Two knife set up...$70

rosettes or corner blocks are typically used with this older style casing.
symmetrical
Moulding 142/10...T-55
$60 set up w/out relief

Moulding 148/12...T-57
$60 set up

susan fruit

Moulding 34/01...T-48
a.k.a. MC-569
5": $60.00 set up
5"+: $85.00 set up

Moulding 34/02...T-56
$60 set up

symmetrical, beads
Moulding 34/03...T-28
$60 set up

Moulding 34/04...T-55
$60 set up

Moulding 34/05...T-57
$60 set up

Moulding 34/06...T-48
$60 set up

Moulding 34/07...T-56
$60 set up

Moulding 34/08...T-39, T-49
$110 set up
symmetrical

Moulding 34/09...T-48
$60 set up

This is a wide version of the 3-3/8 fluted casing.
symmetrical
Moulding 34/10...T-48
$60 set up

Moulding 34/11...T-48
$110 set up

Moulding 34/12...T-57
$70 set up

Moulding 142/02...T-55
$70 set up
add $30 for dado

Moulding 147/05...T-43
$60 set up

Moulding 144/01...T-55
$70 set-up

slightly different tham PM-5
Moulding 143/14...T-48
$60 set up

Moulding 143/01...T-48
$70 set-up

this is the 2-3/4" R/D crown for rope and dentil we have in stock in red oak, soft maple, cherry, walnut, mahogany and poplar for painting.
Moulding 35/01...T-55
$110 set up

Moulding 35/02...T-50
Set up $110

Moulding 35/03...T-50
$110 set up

Moulding 35/04...T-56
$75 set up

symmetrical, beaded
Moulding 35/05...T-56
$60 set up

Moulding 35/06...T-50
$60 set up
beaded

Moulding 35/07...T-50
$60 set-up

Moulding 35/08...T-50
$70 set up

typical brick mould
Moulding 35/09...T-50
$60 set up

Moulding 35/10...T-56
$70 set up

Moulding 35/11...T-56
$70 set up

rope moulding (1/2") in stock in red oak, soft maple, poplar, walnut,mahogany and cherry

rope moulding (3/4") in stock in red oak, soft maple, poplar, walnut, honduran mahogany and cherry

rope moulding (1") in stock in red oak, soft maple, honduran mahogany, walnut, poplar and cherry

Texas star corner blocks availoable in stock in red oak, soft maple, and rubberwood

outside corner in stock in red oak, soft maple, honduran mahogany, walnut and cherry
1/2" coverage
41/03...T-
OSC
$110 set up

Four beaded screen mold, usually in stock in red oak, soft maple, poplar, cherry, and walnut.
41/01...T-
$70 set up
symmetrical

Moulding 35/12...T-56
$70 set up

Moulding 35/13...T-52
edge bead
$85 set up

Moulding 35/14...T-50
Beaded
$60 set up

Moulding 35/15...T-53
$60 set up

Moulding 35/16...T-52
$60 set up
symmetrical

This is an old style picture mould.
Moulding 143/12...T-53
$90 set up

Moulding 145/04...T-52
$60 set up

Moulding 143/02...T-56
$60 set up

Moulding 142/03...T-53
$70 set-up

Moulding 148/06...T-53
$90 set up
lip mould

Moulding 148/13...T-53
$90 set up

Moulding 145/06...T-53
$60 set-up
3"+ add $30

Moulding 36/01...T-52
$110 set up

Any dado size in the bottom when specified
Moulding 36/02...T-56
$180 set-up
symmetrical

symmetrical, beaded
Moulding 36/03...T-53
$60 set up

beaded base
Moulding 36/04...T-53
$50 set up
add $20 for 3-1/2"+

Moulding 36/05...T-53
$110 set up

Moulding 36/06...T-50
$60 set up

dados can be adjusted.
can be used as a cradle

Moulding 36/07...T-50
$90 set up

Spec gap dimension
Moulding 36/08...T-53
$90 set up

Moulding 36/09...T-53
$110 set up

Moulding 36/10...T-50
$90 set up
beaded

symmetrical
Moulding 36/11...T-50
$95 set up

Moulding 149/11...T-50
$110 set up

Moulding 141/08...T-53
$60 set up
Symmetrical

symmetrical
Moulding 36/15...T-56
$110 set up

Moulding 143/07...T-27
bead
$70 set up
Susan Fruit

Moulding 144/03...T-56
$60 set up
beaded

Moulding 142/04...T-50
$70 set-up

Moulding 148/03...T-56
$70 set up

Moulding 148/11...T-53
$70 set up

Moulding 37/01... T-50
$60 set up

Moulding 37/02...T-50
$60 set up

dado can be spec d
Moulding 37/03...T-
$90 set up

Moulding 37/04...T-
$110 set up

Moulding 37/05...T-
$110 set up

Spec gap dimension, single bead
Moulding 37/06...T-47
$90 set up

This is the top half of a very large crown moulding. See CRWNM0612
for the bottom half
Moulding 37/07...T-47
$90 set up

can accept 1/2" rope in slot
Moulding 37/08...T-25, T-50
$90 set up

Moulding 37/09
$60 set up

Moulding 37/10...T-52
$60 set up

Can be used as a cradle too
Moulding 37/11...T-
$75 set up

Moulding 37/12...T-52
$95 set up, $75 w/out notch

Moulding 37/13...T-15
$70 set up

Moulding 37/14...T-52
Three knife set-up...$110

Moulding 143/10...T-
$90 set up

a table perimeter mould
Moulding 150/12...T-
$90 set up

Moulding 148/09...T-
$70 set up

Moulding 144/11...T-
$150 set up because of a deep cut is twice run.
add .30 per foot to run twice

Moulding 38/01...T-58
$110 set up

Moulding 38/02...T-58
$110 set up

slightly different from the basic 4-1/4" crown we keep in s t o c k
Moulding 38/03...T-58
$110 set up

slightly differnt than the basic 4-1/4" crown we keep in s t o c k
Moulding 38/04...T-58
$110 set up

This is bottom portion of a very large crown mould. See CRWNM0596 or CRWNM0613 for two options for the top
half.
Moulding 38/05...T-47
$90 set up

this is the top portion of a large two-piece crown...see CRWNM0612 for bottom piece.
Moulding 38/06...T-47
$90 set up

large outside corner,(OSC)...covers one inch
Moulding 38/07...T-60
$150.00 set-up using 8/4 stock
or 6/4 x 2" blank size...run diagonally with $90 set up

large inside corner
Moulding 38/08...T-60
$110 set up

Moulding 38/09...T-58
$60 set up

Moulding 38/10...T-58 and T-60
$90 set up

Moulding 38/11...T-60
$110 set up

Moulding 38/12...T-60
$70 set up
beaded

Moulding 142/05...T-60
$60 set up
bead

Moulding 150/02...T-60
$90 set up

Moulding 144/10...T-60
$110 set up

Moulding 140/04...T-47
one bead
$60 set up

custom, high set-up...I have no idea what this was used for.
Moulding 145/05...T-47
Symmetrical
$150.00 set-up

Moulding 39/01...T-50
$70 set up

Moulding 39/02...T-58
$60 set up

Moulding 39/03...T-50
$70 set-up

Moulding 39/04...T-53
one bead $70 set-up

Moulding 39/05...T-55
$60 set up

Moulding 39/06...T-
$60 set up

Moulding 39/07...T-58
$70 set-up

Moulding 39/08...T-58
Two knife base...$70 set up

symmetrical
Moulding 39/09...T-58
$60 set up

can be any thickness or width with the pattern running on both sides.
symmetrical
Moulding 39/10...T-58
$85 set up, add $.30/lf to run twice

Moulding 39/11...T-
$60 set up

Moulding 39/12...T-58
$60 set up

Moulding 39/13...T-58
set up $70 without the relief

Moulding 144/02...T-50
$60 set-up
3-1/4 + add $30

Moulding 146/02...T-61
$90 set up, $60 w/out relief
symmetrical

contemporary casing

Moulding 142/09...T-61
$90 set up, $60 setup without relief

Moulding 145/02...T-53
one bead
Two knife base...$70

typical sanitary base available in stock in soft maple and red oak
41/02...T-8
$60 set up w/out relief,
over 3-1/4" add $30

typical screen mold in stock in red oak, soft maple, mahogany, cherry and walnut.
symmetrical
also 1-1/4" screen available... see 147/06
Moulding 41/04...T-
$70 set up

typical half inch quarter round in stock in red oak
41/05
$60 set up

shoe mold for flooring or trim. In stock in red oak, mahogany, soft maple and a few other species
41/06
$70 set up.

also known as 3/4 quarter round. In stock in red oak, white oak, maple, mahogany and a few other species.
Mldg 41/07...T-
$60 set up

Moulding 40/01...T-62
$60 set up

Moulding 40/02...T-62
$70 set up

Moulding 40/03...T-59
$70 set up

Moulding 40/04...T-62
$70 set up

Moulding 40/05...T-62
$60 set up

Moulding 40/06...T-59
$70 set up

Moulding 40/07...T-60
$60 set up

tab size can be spec d
Moulding 40/08...T-
$90 set up

the height can vary to your specs
Moulding 40/09
$135 set up

panel cap or wainscoating cap or just chair rail.
It is actually a modified CR-6
Moulding 40/10...T-61
$90 set up as shown

Moulding 40/11...T-
$70 set up

Moulding 40/12...T-59
$70 set up

Moulding 40/13...T-59
$90 set up

Moulding 41/08...T-63
$70 set up

Moulding 41/09...T-
$70 set-up

Moulding 41/10...T-
$70 set up

Moulding 41/11...T-67
$60 set up
symmetrical

Moulding 41/12...T-62
$90 set up
lip mould

Moulding 41/13...T-65
$60 set up

Moulding 41/14...T-64
$60 set up.
Close to DM7

Moulding 41/15...T-64
$70 set up

Moulding 41/16...T-
$70 set up

Moulding 41/17...T
$125 set up

Moulding 41/18...T-67
$70 set-up

Moulding 41/19...T-67
$60 set up

Single Beaded pattern
Moulding 140/06...T-64
$125 set up
note beveled tongue and groove

Moulding 147/02...T-67
$85 set up
Beaded

Moulding 141/01...T-66
$70 set up
add $30 for dado

Moulding 140/02...T-66
$70 set up

Moulding 42/01...T-62
$70 set up

Moulding 42/02...T-63
one bead
$70 set up

Moulding 42/03...T-63
$110 set up

Moulding 42/04...T-63
$60 set up
add $30 for dado

Moulding 42/05...T-63
Shown with relief on bottom adds $30
$60 set-up without relief

Moulding 42/06...T-63
$70 set up

symmetrical, beads
Moulding 42/07...T-63
$90 set up

symmetrical
Moulding 42/08...T-65
$85 set up....Add $.30/lf for running twice

Moulding 42/09...T-64
$110 set up

Moulding 42/10...T-64
$110 set up

Moulding 145/10...T-64
$110 set up

Moulding 145/11...T-63
$110 set up

dentil
Moulding 149/13...T-65
$110 set up

Moulding 43/01...T-62
$60 set up

Moulding 43/02...T-61
Two knife base...$70 set up

Moulding 43/03...T-61
$60 set up

Moulding 43/04...T-60
$70 set up

Moulding 43/05...T-62
$70 set up

Moulding 43/06...T-59
$70 set up

Moulding 43/07 - T-59
$85 set up

Moulding 43/08...T-44
$60 set up
a.k.a. B11
Also used to make C11
add $30 for dado

Moulding 43/09...T-62
$70 set-up

Moulding 43/10...T-59
$60 set up

Moulding 141/03...T-59
$60 set up

Moulding 147/09...T-61
$60 set up

very large beaded moulding that can be put side by side for even larger beaded moulding
Moulding 144/07...T-59
$70 set up
symmetrical

Moulding 141/02...T-59
$70 set up

Symmetrical
Moulding 44/01...T-67
$60 set up

dado can be spec d
Moulding 44/02...T-
$90 set up

Moulding 44/03...T-100
$110 set up
Note rounded instead of v jointed...very smooth

Photo is shown without 3/8 x 3/8 lip.
Moulding 44/04...T-66
$60 set up as shown; $90 set up with lip.

Moulding 44/05...T-65
$90 set up. $60 w/out relief

Moulding 44/06...T-59
$70 set up

Moulding 44/07...T-68
$60 set up

Moulding 44/08
$110 set up

Moulding 44/09...T-67
large three step casing
$90 set up, $60 w/out relief

Moulding 44/10...T65
$110 set up

Moulding 44/11...T-
$110 set up

Moulding 140/10...T-66
$110 set up

Moulding 147/12...T-67
$110 set up
dentil

Moulding 141/12...T-66
$110 set up

Moulding 48/01...T-76
$70 set up

Moulding 48/02...T-17
$70 set up

used as a perimeter of a cabinet door
Moulding 48/03...T-72
shown $80 set up. add $30 for dado

dado can be any spec d size
Moulding 48/04...T-71
$90 set up

the lip is 3/4" to cover the edge of plywood
CM-34Moulding 48/05...T-35
$90 set up

Moulding 48/06...T-74
$60 set up

Small beaded brick mould
Moulding 48/07...T-
$60 set up

Moulding 48/08...T-75
$60 set up

Moulding 48/09...T-77
$60 set up

dado or offset can be any spec d size; used as a cradle for crown
Moulding 48/10...T-76
$90 set up

Moulding 48/11...T-76
$60 set up

Moulding 48/12...T-76
$70 set up

this is larger than the 5-1/2 crown and comes from 5/4 stock
Moulding 48/13...T-75
$110 set up

Moulding 49/01...T-10
$60 set up
Aka: B12, LB11

Moulding 49/02...T-74
$90 set up

bottom portion of a very large crown designed in two pieces. See bottom half CRWNM0736
Moulding 49/03....T-74
$110 set up for this portion.

Moulding 49/04...T-75
$90 set up

Moulding 49/05...T-73
$110 set up

BVS Moulding 49/06...T-75
$110 set up

Moulding 49/07...T-74
$135 set up

typical old fashioned crown
Moulding 49/08...T-74
$110 set up

Moulding 49/09...T-76
$150 set up, add $.60 per lf for running twice

Moulding 50/01...T-73
$70 set up

Moulding 50/02...T-74
$70 set up

Moulding 50/03...T-73
$70 set up

Moulding 50/04...T-75
$70 set up

used for casting
Moulding 50/05...T-76
$90 set up

3-1/4" half round
symmetrical
Moulding 50/06...T-76
$150...three knives...difficult set up

Moulding 50/07...T-76
$90 set up

notch can be spec d
Moulding 50/08...T-69
$90 set up

Symmetrical
an be any width and thickness with the 4 beads located anywhere. Moulding 50/09...T-69
$60 set upBeaded

this is smaller than the colonial casing we stock. This is only 2" wide
Moulding 50/10...T-73
$60 set up

if we add a relief it will be $30 more
Moulding 50/11...T-75
$60 set up

typical 3/8" offset
lip Moulding 50/12...T-74
$90 set up

Moulding 45/01...T-65
$70 set up

Moulding 45/02...T-68
$70 set up

A type of beaded casing but not symetrical
Moulding 45/03...T-68
$85 set up as shown with round edge
$60 set up with 2 square corners

Moulding 45/04...T-72
$60 set up

Moulding 45/06...T-69
$60 set up

This is different from the fluted casing we stock...therefore custom.
symmetrical
Moulding 45/07...T-72
$60 set up

Moulding 45/08...T-22
$60 set up

Moulding 45/09...T-70
$60 set up

Not the standard 3-1/2" you may be looking for....
Moulding 45/10...T-73
$60 set up

Moulding 45/11...T-68
$60 set up

Moulding 45/12...T-69
$110 set up

Moulding 147/11...T-69
$150
set up
add $.60 per foot to run it twice

Moulding 142/13...T-70
$110 set up
price 5/4 stock

Moulding 144/12...T-73
$110 set up
price from 5/4 stock

Moulding 46/01...T-64
$70 set up

pretty big rail probably going to be laminated to get the size and reliability
Moulding 46/02...T-56, T-70
$150 set up, add $.60/foot for running three times.
symmetrical

symmetrical
Moulding 46/03...T-70
$110 set up

symmetrical handrail
Moulding 46/04...T-71
$110 set up, add $.60/lf for running twice

can t come to points on the edges...1/16" edges
symmetrical
Moulding 46/05...T-69
$90 set up

the lip or lap can be spec d to any size
Moulding 46/06...T-69
$90 set up

3/4" offset for block paneling
dado can be spec d
Moulding 46/07...T-
$90 set up

custom lip mould
Moulding 46/08...T-68
$90 set up

Moulding 46/09...T-73
$60 set up

symmetrical
Moulding 46/10...T-71
$60 set up

simmulates a raised panel for a door
Moulding 46/11...T-65
$60 set up

Moulding 46/12...T-66
$60 set up

Moulding 46/13...T-
$70 set up

Moulding 47/01...T-71
$70 set up

Moulding 47/02...T-71
$60 set up

Moulding 47/03...T-72
$60 set up

this can have a rope inserted in the groove
Moulding 47/04...T-70
$60 set up

symmetrical
Moulding 47/05...T-
$60 set up

a large 3 step casing or can be a base too.
Moulding 47/06...T-72
$60 set up

this is a casing similar to the B-8 base.
Moulding 47/07...T-71
$60 set up

Moulding 47/08...T-71
$60 set up

Moulding 47/09...T-71
$60 set up